Linux version 2.2.18pre21 (herbert@arnor) (gcc version 2.7.2.3) #1 Sat Nov 18 18:47:15 EST 2000
Detected 199909 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.95 BogoMIPS
Memory: 61308k/65536k available (1728k kernel code, 412k reserved, 988k data, 148k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K  L1 D Cache: 32K
CPU: AMD-K6tm w/ multimedia extensions stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0500
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 16384K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: device not capable of full native PCI mode
PIIX4: device disabled (BIOS)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
              This machine does not have any IBM MCA-bus
              or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect: 
3w-xxxx: tw_findcards(): No cards found.
scsi0 : AdvanSys SCSI 3.2M: PCI Ultra 240 CDB: IO D400/F, IRQ 10
scsi : 1 host.
  Vendor: QUANTUM   Model: XP34550S          Rev: LXY4
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: SEAGATE   Model: ST51080N          Rev: 0943
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
  Vendor: PIONEER   Model: CD-ROM DR-U24X    Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.02
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sdc at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 3 SCSI disks total.
sr0: scsi3-mmc drive: 20x/20x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2109840 [1030 MB] [1.0 GB]
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
sdc: Write Protect is off
Partition check:
 sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
 sdb: sdb1
 sdc: sdc4
RAMDISK: Compressed image found at block 0
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 148k freed
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
NET4: Unix domain sockets 1.0 for Linux NET4.0.